gls_odometer.h

Go to the documentation of this file.

/*! \file
  \brief  The disti::GlsOdometer class.

  \par Copyright Information

  Copyright (c) 2017 by The DiSTI Corporation.<br>
  11301 Corporate Blvd., Suite 100<br>
  Orlando, Florida 32817<br>
  USA<br>
  <br>
  All rights reserved.<br>

  This Software contains proprietary trade secrets of DiSTI and may not be
reproduced, in whole or part, in any form, or by any means of electronic,
mechanical, or otherwise, without the written permission of DiSTI.  Said
permission may be derived through the purchase of applicable DiSTI product
licenses which detail the distribution rights of this content and any
Derivative Works based on this or other copyrighted DiSTI Software.

  NO WARRANTY. THE SOFTWARE IS PROVIDED "AS-IS," WITHOUT WARRANTY OF ANY KIND,
AND ANY USE OF THIS SOFTWARE PRODUCT IS AT YOUR OWN RISK. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, DISTI AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES
AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT, WITH REGARD TO THE SOFTWARE.

  LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO EVENT SHALL DISTI OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF DISTI HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.  DISTI'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY SHALL NOT
EXCEED FIVE DOLLARS (US$5.00).

  The aforementioned terms and restrictions are governed by the laws of the
State of Florida and the United States of America.

*/
#ifndef _GLSODOMETER_H
#define _GLSODOMETER_H

#include "gls_cpp_lang_support.h"
#include "group.h"

//////////////////// Provides support for creating DLLs ////////////////////////
#if( defined( GLSGEN_EXPORT_GLSODOMETER ) || defined( GLSGEN_IMPORT_GLSODOMETER ) || defined( GLS_EXPORT_GENERATED ) || defined( GLS_IMPORT_GENERATED ) ) \
    && defined( _MSC_VER )
#    if defined( GLSGEN_EXPORT_GLSODOMETER ) || defined( GLS_EXPORT_GENERATED )
#        define GLSGEN_GLSODOMETER_EXPORT __declspec( dllexport )
#    else
#        define GLSGEN_GLSODOMETER_EXPORT __declspec( dllimport )
#    endif
#else
#    define GLSGEN_GLSODOMETER_EXPORT
#endif
///////////////////////////////////////////////////////////////////////////////

#define LIB_BASE_NAME "gls_odometer"
#include "gls_auto_lib.h"
#undef LIB_BASE_NAME

namespace disti
{
enum
{
    GLS_GLSODOMETER_VALUE = GLS_LAST_INITIALIZER + 1,
    GLS_GLSODOMETER_MIN_VALUE,
    GLS_GLSODOMETER_MAX_VALUE,
    GLS_GLSODOMETER_BASE_SYSTEM,
    GLS_GLSODOMETER_BEHAVIOR_TYPE,
    GLS_GLSODOMETER_GEOMETRY_TYPE,
    GLS_GLSODOMETER_TEXTURE_SCALE,
    GLS_GLSODOMETER_DEGREES_PER_DIGIT
};

/** Runtime implementation of a GlsOdometer */
class GlsOdometer : public Group
{
    friend class GlsOdometerEditor;

private:
    GlsOdometer& operator=( const GlsOdometer& ) DISTI_SPECIAL_MEM_FUN_DELETE;
    GlsOdometer( const GlsOdometer& ) DISTI_SPECIAL_MEM_FUN_DELETE;

public:
    typedef Group _BaseClass;

    /** Create a new GlsOdometer.
      * \param generateInstance  Whether or not to generate an instance name
      * for this inputdevice */
    GLSGEN_GLSODOMETER_EXPORT GlsOdometer( bool generateInstance = false );

    GLSGEN_GLSODOMETER_EXPORT GlsOdometer( const GlsOdometer& that, const bool generateNames );

    /** Destructs a GlsOdometer object */
    virtual GLSGEN_GLSODOMETER_EXPORT ~GlsOdometer();

    static GLSGEN_GLSODOMETER_EXPORT DisplayObject* CreateInstance();

    virtual GLSGEN_GLSODOMETER_EXPORT void SetAvailableAttributes( unsigned int value );
    virtual GLSGEN_GLSODOMETER_EXPORT void CopyProperties( DisplayObject* src );
    virtual GLSGEN_GLSODOMETER_EXPORT DisplayObject* CloneObject( bool generateNames = false );

#ifndef GLES
    virtual GLSGEN_GLSODOMETER_EXPORT InterfaceListType* GetCppInterfaceDescription( InterfaceListType* addToThisList = NULL );
    virtual GLSGEN_GLSODOMETER_EXPORT void               GetCppInterfaceDescriptionFree( InterfaceListType* array );
#endif

    virtual GLSGEN_GLSODOMETER_EXPORT DisplayObject* handle( DisplayEvent* ev );

    virtual GLSGEN_GLSODOMETER_EXPORT void PreDraw( const OpenGLMatrices& parentMatrices, Culler& culler );
    virtual GLSGEN_GLSODOMETER_EXPORT void Draw( void );

    virtual GLSGEN_GLSODOMETER_EXPORT void SetValue( int spec, va_list& args );

    //////////////////////////////////////////////////
    // GlsOdometer specific declarations
    //////////////////////////////////////////////////

    typedef enum
    {
        BEHAVIOR_ANALOG = 0,
        BEHAVIOR_DIGITAL
    } GlsOdometerBehaviorType;

    typedef enum
    {
        GEOMETRY_2D = 0,
        GEOMETRY_3D
    } GlsOdometerGeometryType;

    /** Set the maximum displayable value. */
    GLSGEN_GLSODOMETER_EXPORT void MaxValue( const float& value );
    /** Get the maximum displayable value. */
    virtual GLSGEN_GLSODOMETER_EXPORT float MaxValue();

    /** Set the minimum displayable value. */
    GLSGEN_GLSODOMETER_EXPORT void MinValue( const float& value );
    /** Get the minimum displayable value. */
    virtual GLSGEN_GLSODOMETER_EXPORT float MinValue();

    /** Set the current value to be displayed by the odometer.
      * This value is limited by MaxValue() and MinValue(). */
    GLSGEN_GLSODOMETER_EXPORT void Value( const float& value );
    /** Get the current value of the odometer.
      */
    virtual GLSGEN_GLSODOMETER_EXPORT float Value();

    /** Set the base number system for this odometer.
      * The default is base 10. */
    virtual GLSGEN_GLSODOMETER_EXPORT void BaseSystem( const int& value );
    /** Get the base number system for this odometer.
      */
    virtual GLSGEN_GLSODOMETER_EXPORT int BaseSystem();

    /** Set the BehaviorType controls the "Rollover" behavior of the odometer.
      * BEHAVIOR_ANALOG - Wheels will roll between numbers based on the RolloverThreshold
      * BEHAVIOR_DIGITAL - Wheels will display only whole numbers. 
      */
    GLSGEN_GLSODOMETER_EXPORT void BehaviorType( const GlsOdometerBehaviorType value );
    /** Get the BehaviorType controls the "Rollover" behavior of the odometer.
      */
    virtual GLSGEN_GLSODOMETER_EXPORT GlsOdometerBehaviorType BehaviorType();

    /** Set the GeometryType controls the method used to 
      * "move" the wheels. 
      * GEOMETRY_2D - Texture is translated on the object based on the TextureScale.
      * GEOMETRY_3D - The wheels are rotated about the Y-AXIS of the DCS based on the value of DegreesPerDigit. 
      */
    GLSGEN_GLSODOMETER_EXPORT void GeometryType( const GlsOdometerGeometryType value );
    /** Get the GeometryType 
      */
    virtual GLSGEN_GLSODOMETER_EXPORT GlsOdometerGeometryType GeometryType();

    /** Set the TextureScale which is the amount that the texture should move 
      * for each digit.  The formula to determine this is:
      * (Pixels per digit)/(Texture height).
      * This value is only used when
      * GeometryType == GEOMETRY_2D. */
    GLSGEN_GLSODOMETER_EXPORT void TextureScale( const float& value );
    /** Get the TextureScale */
    virtual GLSGEN_GLSODOMETER_EXPORT float TextureScale();

    /** Set the DegreesPerDigit which is the number of degrees the wheels
      * should be rotated for each digit.       
      * This value is only used when
      * GeometryType == GEOMETRY_3D.*/
    GLSGEN_GLSODOMETER_EXPORT void DegreesPerDigit( const float& value );
    /** Get the DegreesPerDigit */
    virtual GLSGEN_GLSODOMETER_EXPORT float DegreesPerDigit();

    virtual GLSGEN_GLSODOMETER_EXPORT int   OrderOfMagnitude() const;
    virtual GLSGEN_GLSODOMETER_EXPORT float RolloverThreshold() const;

protected:
    int   _orderOfMagnitude;
    float _textureScale;
    float _degreesPerDigit;
    float _rolloverThreshold;

    float                   _minValue;
    float                   _maxValue;
    int                     _baseSystem;
    float                   _currentValue;
    GlsOdometerBehaviorType _behavior;
    GlsOdometerGeometryType _geometry;

    //  DynamicArray<DynamicArray<Vertex> > _startLoc;

    class TexturePoints
    {
    public:
        Vector v1, v2, v3, v4;
    };

    DynamicArray<TexturePoints> _startLoc;
    bool                        _textureLocSaved;

    void OrderOfMagnitude( const int& value );

    void RolloverThreshold( const float& value );

    void CalculateOrderOfMagnitude( void );
    void CalculateRolloverThreshold( void );

    // Sets the current Texture Coordinates
    // as the zero position for the wheels.
    void SaveTextureLoc( void );

#ifdef GLES
    /** Set a single attribute from the GLO file.
     * \param data The attribute to set and its associated data.
     */
    virtual GLS_EXPORT void SetFromGloData( GlsGloFileAttribute& data );
#endif
};

} // namespace disti

#endif